Product
Code |
Description |
PCA100-2
PCA105-6 |
100mm
Cameras are available
105mm Cameras are available |
| PPM1 |
Photomultiplier
Assembly samples the output light intensity from the I.I.
System for ABS or phototimer. Use with a straight through
optical path, the PRA1 Right Angle Adapter or any Light
Distributor. |
| PPM2 |
Photomultiplier
Assembly samples the output light intensity from the I.I.
System for ABS or phototimer. Use with the PVCCDC Camera, or
the PRA2 Right Angle Adapter. |
| ***Note |
PMT
and video outputs are available for low voltage drive units
such as ±6V, ±7V, 0-12V or other. |
| PAB115 |
Automatic
Brightness Stabilizer (ABS) will automatically seek and
maintain a preset brightness level during fluoroscopy.
Variable kVp and selectable mA may be adjusted manually by
controls on the I.I. housing 5 minute digital timer and
digital fluoroscopic kVp display are provided. Unit is
compatible with fluoro X-Ray controls that have a variac or
will accept a variac for varying fluoroscopic kilovoltage, and
a potentiometer or resistor network, or will accept a resistor
network for varying fluoroscopic tube current. 25 ft. cable is
included. 110V/5A variac. PPM1 or PPM2 is required. |
| PAB225 |
Same
as PAB115 with 220V/5A variac. |
| PAB2210 |
Same
as PAB115 with 220V/10A variac. |
| PABR |
ABS
Control Box remote from I.I. housing. |
| PAB-CA |
ABS
Cable over standard 25 ft. |
| PPM-CA |
Photomultiplier
Cable over standard 25 ft. |
