|
 
|
Checklist
| RMA |
When
returning material for service, repair, Retrofit, evaluation,
etc., please first contact Precise Optics for a Return
Materials Authorization tracking number. |
| Power
Input |
Specify
120V or 220V, 60Hz or 50 Hz operation. |
| Mode
Switch |
Specify
on I.I. housing or remote from I.I. housing. |
| Mount
type |
For
Image Intensifier input mount - specify "no tab".
For overhead support or "C" Arm mount - specify
"tab mount plate". |
| Color |
Precise
Gray or specify color at no extra charge. |
| Light Distribution if other than a straight in line light path |
Right Angle Adapter, specify left, right, front or back mount over or under table, as facing unit.
Two and Three Port Light Distributors, specify left, right, front or back mount over or under table, as facing unit. |
| CCTV
Components |
Specify
type of Camera, line scan rate, tube type and functions, as
applicable. Specify Monitor size, line
scan rate and number of Monitors.
|
| PDF
Units |
Specify
power input 120V or 220V, 60Hz or 50 Hz.
|
| Photomultiplier |
If
for use on other than a Precise ABS, specify PMT resistor
network and cable length.
|
| Automatic
Brightness Stabilizer |
Specify
rating of 110V/5A, 220V/5A, or 220V/10A.
Specify control box on Image
Intensifier housing or remote.
Specify ABS cable length. 25
ft. is standard.
Remote version, specify PMT
cable length. 20 ft. is standard.
|
| Spot
Film Adapter |
Specify
Spot Film Adapter device manufacturer, model number and
dimensions, front to back and head to foot.
Specify permanent or
removable mount.
|
| Retrofits |
Certain
Retrofits ( eg. Siemens Units ) may require modifications that
will place them in a higher price category. It is recommended
that you contact Precise Optics to confirm this information
prior to quoting or sending an Image Intensifier for Retrofit.
High performance 9 and
12-inch HX Series Image Intensifiers may be used for
Retrofits, but will have special optical requirements based
upon the 14mm thick, 25mm diameter output window. The
objective lens may need to be changed to maintain the same
original image magnification.
Current Retrofits include:
AFP, CGR, Diamed, Fischer, General Electric, Machlett /
Raytheon, NAI, Medelex, OEC / Diasonics, Oldelft, Philips,
Picker/ Sierra Scientific, Tubemaster, Precise Optics,
Profexray / Litton / Xonics / Elscint, Shimadzu, Siemens,
Toshiba and Varian, as well as other international brands. |
|
|